Accessories
1 Large semicircular crest
Closes the roof to the top at the intersection of two waters, acting as a shield against seepage.
2 Small semicircular crest
Alternative for the large crest, closes the roof to the top at the intersection of two waters, acting as a shield against seepage.
3 Wall border
It is used at waters intersection with fire walls, dividing walls. Prevents water to seep on the wall
.
4 Eaves
Mounted under the cover at the junction of two waters and directs water to the rainwater system.
5 Fixing plates to the wall
It is used at the intersection of one water with a wall and prevents water to seep on the wall.
6 Crest cap
Sealing role and at the same time prevents birds from coming in.
7 Woodscrew
Fastens the metal sheet plates and accessories on the wood lath.
8 Bitumen tape
Flexible self adhesive waterproofing tape, recommended for insulation and anti- moisture protection.
9 Universal sealing tapel
Used on the eaves and under the crest. Sealing tole.
10 Crest closure
Sealing role and at the same time prevents birds from coming in.
11 Gable border
Closes the sides of the roof covering the roof structure edges. It is assembled over the fascia board, after tile plates were fixed.
12 Gable border under the tile
Closes the sides of the roof and is assembled over the fascia board, before fixing the tile plates.
13 Rain shadow border
Connects to the drainage system allowing water to drain from the cover to the trough.
14 Snow stopper
Is assembled on the cover and prevents snow slides off the roof.
16 Omega snow stoppers
It is an alternative to conventional snow stoppers.
16 Slope breaking
It is used in areas where roof pitch changes the slope.
17 Synthetic Roofing Underlayment
RhinoRoof U20 is a highly-engineered, mechanically-attached, coated woven synthetic roofing underlayment for sloped roofs.